-
Zhang, W., Gallagher, B., Jin, Q. and Huang, C. H.* (2022), “Mineralogy Optimization for Immobilization of Potentially Toxic Elements and Halides in Co-Disposed Flue Gas Desulfurization Brines and Bituminous Coal Fly Ash”, Journal of Hazardous Materials Advances, 8, 100154. Download PDF
-
Jin, Q., Lucas, S. N., Tang. Y., and Kurtis, K. E. (2022), “NOx uptake capacities and sequestration pathways by hydrated cementitious phases”, Cement and Concrete Research, 159, 106882. Download PDF
-
Islam, M., Zhang, Q., and Jin, Q. (2022), “A Review of Existing Codes and Standards on Design Factors for UHPC Placement and Fiber Orientation”, Construction and Building Materials, 345, 128308. Download PDF
-
Li, J., Jin, Q., Zhang, W., Li, C., and Monteiro, P. J. M. (2022), “Microstructure and durability performance of sustainable cementitious composites containing high-volume regenerative biosilica”, Resources, Conservation & Recycling, 178, 106038. Download PDF
-
Jin, Q., Hordern, S. L., Tang. Y., and Kurtis, K. E. (2021), “NOx sequestration by calcium aluminate cementitious materials”, Cement and Concrete Research, 142, 106381. Download PDF
-
Bullard, J. W., Jin, Q., and Snyder, K. A. (2021), “How do specific surface area and particle size distribution change when granular media dissolve?”, Chemical Engineering Journal, 406, 127098. Download PDF
-
Jin, Q. Perry, L. N., and Bullard, J. W. (2020). “Temperature dependence of gypsum dissolution rates”, Cement and Concrete Research, 129, 105969. Download PDF
-
Jin, Q. and Li, V. C. (2019). “Structural and durability assessment of ECC/Concrete dual-layer system for tall wind turbine towers”, J. of Engineering Structures, 196, 109-115. Download PDF
-
Jin, Q., Faraldos, M., Bahamonde, A., Zaribaf, B. H., and Kurtis, K. E. (2019). “Titania and Silica Nanoparticle-Modified Coatings for Cementitious Materials”, ACI SP: Nanotechnology for Improved Concrete Performance, 335, 97-111, Download PDF
-
Jin, Q., Saad, E. M., Zhang, W., Tang, Y. and Kurtis, K. E. (2019). “Quantification of NOx Uptake in Plain and TiO2-doped Cementitious Materials”, Cement and Concrete Research, 122, 251-256. Download PDF
-
Jin, Q. and Li, V. C. (2019). “Development of Lightweight Engineered Cementitious Composite for Durability Enhancement of Tall Concrete Wind Towers”, Cement and Concrete Composites, 96, 87-94. Download PDF
-
Jin, Q., Leung, C. K.Y. and Yu, C. (2013). “Effect Joining Method for Pseudo-ductile Permanent Formwork” Materials and Structures, 46(3), 345-360. Download PDF
-
Jin, Q. and Leung, C. (2011). “Fiber-reinforced cementitious composite (FRCC) plate for anchoring of FRP sheet on concrete member” J. Composites for Construction, 15(5), 790-798. Download PDF
Peer-Reviewed Journal Articles
- Raymond Chandler -
“A good story cannot be devised; it has to be distilled.”
Publications
-
Jin, Q., VanderZwaag, M. B., Hordern, S. L., Tang, Y. and Kurtis, K. E. (2018). “Understanding of the Photocatalytic Products of NOx Degradation in TiO2-based Cementitious Materials”, Proceedings of the 6th International Symposium on Nanotechnology in Construction (NICOM6), Hong Kong
-
Jin, Q. (2017). “Mathematical Modeling based on the Evolution of Concrete Deterioration for Optimizing Concrete Service Life and Repair Schedules”, Proceedings of the 3rd Corvallis Workshops on Service-life Prediction of Concrete, Edited by Jason H. Ideker and Karen L. Scrivener, Corvallis, Oregon.
-
Jin, Q. and Leung, C. K.Y. (2012). “The Use of FRCC and FRP for the Joining Method of Permanent Formwork”, Proceedings of third IIFC Asia-Pacific regional conference on the research and application of fiber reinforced polymers (FRP) in civil and architectural engineering structures, Edited by T. Ueda and T. Kanakubo, Hokkaido, Japan
-
Jin, Q., Leung, C. K.Y. and Chung, W. (2011). “The Joining Method for Permanent Formwork”, Proceedings of International RILEM Conference on Advances in Construction Material through Science and Engineering, Edited by Christopher K.Y. Leung and K.T. Wan, Hong Kong
-
Jin, Q. and Leung, C. K.Y. (2010). “Fiber-reinforced cementitious composite (FRCC) plate for the anchoring of FRP sheet on concrete member”, Proceedings of the Fifth International Conference on FRP Composites in Civil Engineering, Edited by L. Ye, P. Feng, and Q. Yue, Beijing, China
Technical Reports
-
Jin, Q. and Li, V. C. (2016), “Program on Technology Innovation: Application of Advanced Concrete Technology in Tall Wind Towers” 3002007871, Electric Power Research Institute (EPRI), CA
Presentations
-
Jin, Q., Perry, L., Bullard, J. W., and Kurtis, K. E. (2019). “Dissolution Kinetics of Calcium Salts under Different Environmental Conditions”, 10th Advances in Cement-Based Materials, Urbana, IL
-
Jin, Q. (2018). “TiO2 Nanoparticles-Modified Coating on Concrete Infrastructure for Air-Purification and Self-Cleaning”, presented to ACI Georgia Chapter, Atlanta, GA, December 2018
-
Jin, Q., VanderZwaag, M. B., Hordern, S. L., Tang, Y. and Kurtis, K. E. (2018). “Understanding of the
Photocatalytic Products of NOx Degradation in TiO2-based Cementitious Materials”, 6th International Symposium
on Nanotechnology in Construction (NICOM6), Hong Kong -
Jin, Q., Faraldos, M., Bahamonde, A., Balonis-Sant, M., Sant, G. and Kurtis, K. E. (2018). “Engineering Smart TiO2 Nanoparticle-Modified Coatings for Enhanced Corrosion Resistance”, ACI Convention, Las Vegas, NV
-
Faraldos, M., Luna-Sanguino, G., Tolosana-Moranchel, A. Jin, Q., Kurtis, K. E. and Bahamonde, A. (2018). “NOx Photocatalytic Degradation and Self-cleaning of TiO2-GO Coated Cementitious Materials”, CICAT, 26th Catalysis Congress, Coimbra, Portugal
-
Jin, Q., Tang Y. and Kurtis, K. E. (2018). “The Fundamental Understanding of NOx Sequestration of Photocatalytic Cementitious Materials”, 9th Advances in Cement-Based Materials, University Park, PA
-
Bahamonde, A., Jiménez-Zorita, M., Jin, Q., Zaribaf, B. H., Kurtis, K. E., Faraldos, M. (2017), “Photo-Cements with Self-Cleaning Properties for NOx Abatement: Influence of Titania/Silica Coatings,” 5th European Conference on Environmental Applications of Advanced Oxidation Processes (EAAOP5), Prague, Czech Republic
-
Jin, Q., Saad, E. M., Vanderzwaag, M. B., Reeve, T. L., Tang Y. and Kurtis, K.E. (2017). “Where does nitrogen go in photocatalytic cement?”, 8th Advances in Cement-Based Materials, Atlanta, Georgia
-
Jin, Q., Spevacek, C., El-Dehaibi, N.; and Johnson, W. (2016), “Uber and the Sharing Economy: Global Market Expansion and Reception.” WDI Publishing, University of Michigan; available online. Download PDF
Other Publications
Conference Proceedings